• Home
• About Us
• Products
  • PSA Nitrogen
  • Membrane Nitrogen
  • VPSA Oxygen
  • PSA Oxygen
  • Medical Oxygen
  • Hydrogen
  • Ammonia Cracker
  • Inert Gas Generators
    • Exo Gas
    • Endo Gas
    • PSA N2 & Methanol
  • Air Dryers
• Enquiry
• Contact Us
• Service & Parts
• Media / News
• Careers

Specifications

Capacity

10 NM³/hr to 100 NM³/hr

Dew Point

(-) 10°C to (+) 10°C

Gas Composition

Gas	Percentage
CO	28 to 30%
H2	20 to 25%
CO2	0.1 to 0.5%
N2	Balance

Endo Gas Generator

Endo-gas (endothermic gas) generators produce Endothermic gas (mixture of CO, CO2, N2 and H2) by reaction of air and fuel on Nickel catalyst at 1050°C temperature.

Endothermic Gas Generation principle
Endothermic process requires external heat which is provided by electrical heaters or fuel burning around the retort. Retort is made of heat resistant alloy suitable for 1050°C temperature. Due to cracking of fuel, some carbon deposits on catalyst, which is burnt-off every 15-days running by regeneration process which regains catalyst activity.

Lifespan of major components

• Life of retort is around 2-years.
• Catalyst life is around 2-years.

Fuel
The following fuels can be used in these generators:

• Natural Gas
• LPG
• Propane Gas

Kerosene and Diesel fuels are not suitable for Endo-gas generation.

Industrial Uses
Endo-gas generators find use in:

• Gas carburizing
• Carbon restoration in steel
• Carbo-nitriding
• Hardening / Annealing
• High temperature Brazing
• Sintering
• Reduction of metal oxides

Your Enquiry
Should you wish to discuss your requirement of Endo Gas Generator, you may send us your enquiry here.