oxypure_logo_6_200
VPSA Oxygen Generator
email feed help
  VPSA Principle | PSA v/s VPSA | Benefits of VPSA | Product Photos | Specifications

MVS Engineering is the leading manufacturer of VPSA Oxygen Plants. We have been manufacturing Oxypure VPSA (Vacuum Pressure Swing Adsorption) and PSA (Pressure Swing Adsorption) Oxygen generators for several years and have supplied many such units.


VPSA Principle:
This process consists of 2 beds filled with Molecular Sieves. These cycle alternately in Production and in Regeneration. Feed air pressure is generally 1.1 to 1.5 Bar, which gives Oxygen production at 1.05 to 1.3 Bar. Regeneration of Molecular sieves is done by a Vacuum pump 0.4 Bar Absolute pressure. The waste gas is 85% Nitrogen and 15% Oxygen which is vented to atmosphere. Product Oxygen gas purity is 90 to 95%.

vpsao2flowscheme-2


Comparison of VPSA with PSA technology
  • Well suited for larger capacities
    Due to lower power consumption in larger capacities, VPSA design is preferred and recommended for larger capacity (typically above 200 NM3/hr capacities) Oxygen requirements.
  • Lower power consumption
    Power consumption is only 0.45 KW per cubic meter of Oxygen produced. At capacities above 200 NM3/hr, this is lower than a corresponding PSA unit.
  • Lower output pressure
    Direct Oxygen production pressure is up to 1.3 Bar. This is lower than PSA plants, in which output pressure of up to 4 Bar can be derived.
    However, for higher Oxygen pressure requirement in VPSA plants, Oxygen compressor is added and supplied by us.
  • Higher Investment
    Compared to PSA Oxygen plants, VPSA plants are more costly to build. However, due to more efficient operation, this extra cost is easily recovered in short time.


    Benefits of Oxypure VPSA technology
    Reliable, well-proven technology
    VPSA technology has been used in MVS Oxypure Oxygen generators for several years and our generators are operating successfully around the world. Our technology is time tested and very well proven in the field. We use molecular sieves from only well renowned and reputed suppliers, which ensures that you get many years of trouble free operation and long life from your investment.

    Fast Startup
    These units can be turned ON and OFF on-demand with the push of a single button. Oxypure VPSA units only require 15 minutes to start producing high purity Oxygen and there isn’t a need for the unit to be running when you are not consuming Oxygen gas. This is unlike the cryogenic Oxygen plants where the unit has to be kept running whether Oxygen is needed or not.

    Modular Design
    MVS incorporates the use of several skids and designing the system in a modular construction. This feature allows easy transportation and easy installation of the system at your site. Our engineer is present at site to oversee installation and also to assist with commissioning and training of your personnel.

    Long life, low maintenance
    There are very limited moving parts in the VPSA process and hence with routine preventive maintenance, MVS Oxygen Generators give you years and years of trouble free operation.

    Continuous, uninterrupted supply and guaranteed purity
    When you install the Oxypure VPSA Oxygen generator on-site, you are in control of your Oxygen supply. If you are currently using Liquid Oxygen tank, then there is always dependence on your suppliers and there is no guarantee of the purity of Oxygen being supplied. With VPSA system, you can be sure of the purity of Oxygen you get with the included Oxygen purity analyzer.

    High quality
    MVS uses best quality molecular sieves and only procures it from world renowned and reputed suppliers. Unlike the Chinese make molecular sieves that are available for much lower cost, there are no problems in our molecular sieves such as excessive dust, low Oxygen purity and short life.

    Industrial Uses
    Our Oxypure VPSA Oxygen Generators are widely used across many industries including:
    • Paper and Pulp industries for Oxybleaching and delignification
    • Glass industries for furnace enrichment
    • Metallurgical industries for oxygen enrichment of furnaces
    • Chemical industries for oxidation reactions and for incinerators
    • Water and Wastewater treatment

    Models:
    MVS offers a variety of models from 200 to 5000 NM3/hr Oxygen capacity needs. 93% purity Oxygen produced has 2.5% Nitrogen and 4.5% Argon.

    Your Enquiry
    Should you wish to discuss your requirement of VPSA Oxygen Generator, you may send us your enquiry here.


    Product Photos
  • VPSA Towers
    vpsao2_1_sm_z
  •    
  • Air Blowers
    vpsao2_2_sm_z
  • Storage Tanks
    vpsao2_4_sm_z
  •    
  • Booster Compressor
    vpsao2_3_sm_z


  • Oxypure VPSA Oxygen Generator Specifications
    specs_vpsa02

    * VPSA is alternately known as VSA Oxygen (Vacuum Swing Adsorption) and PVSA Oxygen (Pressure Vacuum Swing Adsorption)
    VPSA Oxygen Generator, VPSA Oxygen Gas Generator, VPSA Oxygen Plants, VPSA Oxygen Gas Plants, VSA Oxygen, PVSA Oxygen, Low Cost Oxygen Generator, Produce high purity Oxygen, Captive Oxygen Generator, On site Oxygen Generator, Molecular Sieve Oxygen Generation, High quality Zeolite based Oxygen Generator, Efficient Oxygen Generator